- Home
- ยป
- Our Products
- »
- HDPE Injection Moulding Granules
HDPE Injection Moulding Granules
Our range of products include 50ma180 reliance hdpe injection moulding granules, 180m50 iocl hdpe injection moulding granules, m5220 opal hdpe injection moulding granules, i56a200ua gail hdpe injection moulding granules and m5018l haldia hdpe injection moulding granules.

50MA180 Reliance HDPE Injection Moulding Granules
Product Price: Rs 78 / KgGet Best Price
Product Brochure
Product Details:
Brand | Reliance |
Grade | 50MA180 |
Material | HDPE Plastic |
Form | Granules |
Melt Flow Index (190 deg C/2.16 kg) | 20.0 gm/10 min. |
Density (23 deg C) | 0.950 gm/cm3 |
Tensile Strength at Yield | 22 MPa |
Elongation at Yield | 12 % |
Flexural Modulus | 900 MPa |
Vicat Softening Point | 123 deg C |
Notched Izod Impact Strength | 30 J/m |
Applications:
- Houseware, storage bins, thin wall moulding.
Regulatory Information:
- Meets the requirements stipulated in standard IS: 10146 on "Specification for Polyethylene for safe use in contact with foodstuffs pharmaceuticals, and drinking water". It also conforms to the positive list of constituents as prescribed in IS :10141. The grade and the additives incorporated in it also comply with the FDA:CDR Title 21,177.1520, Olefin polymers.
Storage Recommendations:
- Bags should be stored in dry / closed conditions at temperatures below 50°C and protected for UV / direct sunlight.
Get Best Quote
Request Callback
180M50 IOCL HDPE Injection Moulding Granules
Product Price: Rs 78 / KgGet Best Price
Product Brochure
Product Details:
Brand | IOCL |
Grade | 180M50 |
Material | HDPE Plastic |
Hardness | 55 Shore D |
Form | Granules |
Melt Flow Index (190 deg C & 2.16 Kg) | 20 gm/10 min |
Density @ 23 deg C | 0.950 gm/cm3 |
Tensile Yield Strength | 22 MPa |
Elongation at Yield | 12 % |
Flexural Modulus | 750 MPa |
Vicat Softening Point (10 N) | 124 deg C |
180M50 is a High Density Polyethylene manufactured using Nova Chemical''s Sclairtech Solution Polymerization Technology. 180M50 is a natural colored polymer with excellent flow properties, very good processability and excellent gloss.
Recommended Applications:
HDPE 180M50 is designed to suite the following application areas:
- Injection molded housewares
- Thin wall molded products.
Get Best Quote
Request Callback
M5220 OPAL HDPE Injection Moulding Granules
Product Price: Rs 78 / KgGet Best Price
Product Brochure
Product Details:
Brand | OPAL |
Grade | M5220 |
Material | HDPE Plastic |
Hardness | 62 Shore D |
Form | Granules |
Melt Flow Index ( 190 deg C & 2.16 kg) | 21 g/10 min |
Density (at 23 deg C) | 0.952 gm/cm3 |
Tensile Strength @ Yield (50mm / min) | 22.0 MPa |
Elongation @ Break (50mm / min) | 350 % |
Flexural Modulus | 900 Mpa |
Izod Impact Strength (at 23 deg C) | 30 J/m |
Vicat Softening Point (10N) | 125 deg C |
Heat Deflection Temperature (0.455 MPa) | 80 deg C |
HDPE M5220 is a natural colored grade produced with the latest Ineos Gas Phase polymerization Technology exhibiting following features:
- Good Flow
- High Warpage Resistance
- Suitable for faster molding cycles
HDPE M5220 is recommended for following applications:
- Housewares, storage bins
- Thin wall food containers
- Caps & Closures
- Base resin for masterbatch
Get Best Quote
Request Callback
I56A200UA Gail HDPE Injection Moulding Granules
Product Price: Rs 78 / KgGet Best Price
Product Brochure
Product Details:
Brand | Gail |
Density | 0.956 gm/cc |
Grade | I56A200UA |
Material | HDPE Plastic |
Form | Granules |
Melt Flow Index (I2 ) | 20 gm/10min |
Tensile Strength @Yield | 310 kg/cm2 |
Elongation @ Yield | 10 % |
Flexural Modulus | 11000 kg/cm2 |
I56A200U has excellent processability with low degree of warpage and good mechanical properties. It is characterized by fast cycling and is especially suitable for household items like Buckets, Mug, Toys etc.
Processing Guidelines:
- Barrel temperature: 200 - 2800C
- Mould temperature: 30-40°C
Regulatory Information:
- Certificate is available on request.
Packaging & Storage:
- I56A200U is available in natural colour/pellet form in 25 kg strong bags made of woven fabric. The product should be stored in dry conditions at temperature below 50oC and protected from UV light.
Get Best Quote
Request Callback
M5018L Haldia HDPE Injection Moulding Granules
Product Price: Rs 78 / KgGet Best Price
Product Brochure
Product Details:
Brand | Haldia |
Grade | M5018L |
Material | HDPE Plastic |
Hardness | 62 Shore D |
Form | Granules |
Melt Flow Index (2.16 kg at 190 deg C) | 19.0 g/10 min |
Density (at 23 deg C) | 0.950 g/cm3 |
Tensile Strength at Yield | 22 MPa |
Elongation at Break | 350 % |
Izod Impact Strength (23 deg C) | 30 J/m |
Flexural Modulus | 800 MPa |
Spiral Flow Length HPL Method (235 deg C) | 600 mm. |
Vicat Softening Point(10N) | 78 deg C |
Heat Deflection Temperature (0.45 MPa) | 126 deg C |
DSC Melting Temperature | 132 deg C |
Get Best Quote
Request Callback