Call 08043048867 61% Response Rate

Send Email

LDPE Lamination Extrusion Coating Granules

Our range of products include 1070la17 reliance ldpe lamination extrusion coating granules, e1970 aramco ldpe lamination extrusion coating granules, 801yy titan ldpe lamination extrusion coating granules, d777c scg ldpe lamination extrusion coating granules and 19n430 ineos ldpe lamination extrusion coating granules.
1070LA17 Reliance LDPE Lamination Extrusion Coating Granules

1070LA17 Reliance LDPE Lamination Extrusion Coating Granules

Product Price: Rs 106 / KgGet Best Price

Product Brochure

Product Details:
BrandReliance
MaterialLDPE
Grade1070LA17
FormGranules
Melt Flow Index (19 deg C/2.16 kg)8.5 gm/10min
Density (23 deg C)0.917 gm/cc
Tensile Strength at Break (MD/TD)18/15 MPa
Elongation at Break (MD/TD)250/400 %
1070LA17 is an extrusion coating grade Low density Polyethylene (LDPE) produced by high pressure autoclave process. This grade is specially developed for extrusion coating on different substrates and contains no additives. It exhibits excellent drawdown characteristics maintaining good adhesion, with very low neck-in even at high line speeds. It can also be easily processed into thin gauge films for adhesive lamination and heat and pressure lamination.

Applications:
  • Extrusion coating, heat & pressure lamination film.

Typical Process Conditions:
  • Typical Process Temp (??C) - 200 – 320 

Regulatory Information: 
  • Meets the requirements stipulated in standard IS: I0146 on "Specification for Polyethylene for safe use in contact with foodstuffs, pharmaceuticals, and drinking water". It also conforms to IS 16738:2018 “Positive List of Constituents for Polypropylene, Polyethylene and their Copolymers for its Safe Use in Contact with Foodstuffs and Pharmaceuticals”
  • The grade and the additives incorporated in it also comply with the FDA: CFR Title 21,177.1520, Olefin polymers.
  • 1070LA17 is not intended for use in medical and pharmaceutical applications. 

Storage Recommendations:
  • Bags should be stored in dry/closed conditions at temperatures below 50°C and protected from UV / direct sunlight. 
Get Best QuoteRequest Callback
E1970 Aramco LDPE Lamination Extrusion Coating Granules

E1970 Aramco LDPE Lamination Extrusion Coating Granules

Product Price: Rs 105 / KgGet Best Price

Product Brochure

Product Details:
BrandAramco
GradeE1970
MaterialLDPE
FormGranules
Melt Flow Rate (190 deg C/2.16kg)7.0 g/10min
Density919 kg/m3
Tensile Strength at Break14 MPa
Tensile Elongation at Break550 %
Stiffness165 MPa
ESCR1.9 h
Vicat Softening Point86 deg C
Melting Point106 deg C
Product Description:
Aramco LDPE E1970 is a low density polyethylene resin which has good bonding strength with various substrates, low neck-in properties and excellent process ability for thinner coating. Aramco LDPE E1970 is not formulated with any additive.

Typical Applications:
  • Extrusion coating on polyester film, paper, aluminum foil and BOPP film.
Get Best QuoteRequest Callback
801YY Titan LDPE Lamination Extrusion Coating Granules

801YY Titan LDPE Lamination Extrusion Coating Granules

Product Price: Rs 104 / KgGet Best Price

Product Brochure

Product Details:
BrandTitan
Grade801YY
MaterialLDPE
FormGranules
Melt Index7 g/10 min
Density0.920 g/cm3
Vicat Softening Point86 deg C
Neck-in (constant output 50m/min, 295 deg C)9 cm
Applications:
  • Coating for all substrates

Additives:
  • Barefoot

Features:
  • Excellent drawdown
  • Good heat sealibility and adhesion properties
Get Best QuoteRequest Callback
D777C SCG LDPE Lamination Extrusion Coating Granules

D777C SCG LDPE Lamination Extrusion Coating Granules

Product Price: Rs 104.5 / KgGet Best Price

Product Brochure

Product Details:
BrandSCG
GradeD777C
MaterialLDPE
FormGranules
Melt Flow Rate7.0 g/10 min
Density0.918 g/cm3
Melting Point107 deg C
Vicat Softening Point85 deg C
Neck-in (315 deg C) (Constant output at 50 rpm)5 cm
EL-LENETM D777C is an autoclave LDPE grade for extrusion coating/lamination.
Get Best QuoteRequest Callback
19N430 INEOS LDPE Lamination Extrusion Coating Granules

19N430 INEOS LDPE Lamination Extrusion Coating Granules

Product Price: Rs 102 / KgGet Best Price

Product Brochure

Product Details:
BrandINEOS
Grade19N430
MaterialLDPE
FormGranules
Melt Flow Rate7.5 g/10min
Density920 kg/m3
Tensile Modulus170 MPa
Tensile Strength at Yield9 MPa
Tensile Strength at Break10 MPa
Tensile Strain at Break550 %
Melting Temperature108 deg C
Vicat Softening Temperature87 deg C
Product Technical Information:
  • Additive free LDPE homopolymer extrusion coating, injection moulding and compounding product 

Benefits & Features:
  • 19N430 special polymer structure gives the following properties: 

For extrusion coating:
  • Well balanced Neck In and Draw Down performance
  • Good adhesion performance and sealing properties

For injection moulding and compounding:
  • Excellent flexibility
  • Good transparency
  • Absence of any kind of additive allowing tailor formulation of specific compounds and master-batches

Applications:
  • Extrusion coating and laminating grade designed for a medium to high coating line speed.
  • 19N430 is also suitable for injection moulding of flexible products (caps and closures, food containers, soft tubes, technical parts) as well as for the production of compounds. 
  • We recommend that you consult your INEOS technical representative for further advice on the use of 19N430. 
Get Best QuoteRequest Callback

EXPLORE MORE CATEGORIES

Looking For "LDPE Lamination Extrusion Coating Granules"?
Thank you Your Enquiry has been sent successfully.
© M. S. Plast. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.