Call 08043048867 61% Response Rate

Send Email

PP Raffia Granules

Leading Wholesale Trader of h030sg reliance pp raffia granules, 1030rg iocl pp raffia granules, rh03 opal pp raffia granules, r03rr hmel pp raffia granules, hr003 mrpl pp raffia granules and hp30g aramco pp raffia granules from Ahmedabad.
H030SG Reliance PP Raffia Granules

H030SG Reliance PP Raffia Granules

Product Price: Rs 80 / KgGet Best Price

Product Brochure

Product Details:
MaterialPoly Propylene
FormGranules
BrandReliance
GradeH030SG
Melt Flow Rate (230 deg C/2.16 kg)3.4 g/10 min
Tensile Strength at Yield (50 mm/min)34 MPa
Elongation at Yield (50 mm/min)10%
Flexural Modulus (1% secant)1650 MPa
Notched Izod Impact Strength (23 deg C)40 J/m
Heat Deflection Temperature (455 kPa)10 deg C
Repol H030SG is recommended for Raffia Tapes wed in making woven fabrics for sacking, carpet backing, industrial packaging and geotextile applications. Repol H030SG combines good processability on water bath and chill-roll with excellent mechanical properties. Formulated for low water carry-over. 

Applications: 
  • Woven fabrics, sacks & monofilaments 

Regulatory Information: 
  • Meets the requirements stipulated in IS 10910 on 'Specification for Polypropylene and its Copolymers for safe use in contact with foodstuff, pharmaceuticals, and drinking water'. Additives incorporated in this grade conform to the positive list of constituents as prescribed in IS 10909. The grade and the additives incorporated in it also comply with the FDA:CFR Title 21,177.1520, Olefin polymers 

Storage Recommendations: 
  • Bags should be stored in dry/ closed conditions at temperatures below 50°C and protected from UV/direct sunlight 

Get Best QuoteRequest Callback
1030RG IOCL PP Raffia Granules

1030RG IOCL PP Raffia Granules

Product Price: Rs 80 / KgGet Best Price

Product Brochure

Product Details:
MaterialPoly Propylene
FormGranules
BrandIOCL
Grade1030RG
Melt Flow Index (2300C & 2.16 Kg)3.3 gm/10 min
Density @ 23 deg C3 0.90 gm/cm
Tensile Strength @ Yield (50 mm/min)35 MPa
Elongation @ Yield (50 mm/min)12 %
Flexural Modulus (1.3 mm/min)1550 MPa
Notched Izod Impact Strength @ 23 deg C50 J/m
Heat Deflection Temperature (0.46 N/m2)95 deg C
Vicat Softening Point (10 N)156 deg C
Product Description:
PP Homopolymer 1030RG is a natural colored grade produced by the latest Spheripol II Technology with following features:
  • Exceptional processability
  • Low water carry over
  • Good balance of tenacity & elongation 

Recommended Applications:
PP Homopolymer 1030RG is recommended for stretched tapes of Woven sacks like
  • Fabrics for general packaging
  • Cement & polymers packaging
  • Food grains packaging
  • Carpet packing 
Get Best QuoteRequest Callback
RH03 OPAL PP Raffia Granules

RH03 OPAL PP Raffia Granules

Product Price: Rs 79.5 / KGGet Best Price

Product Brochure

Product Details:
MaterialPoly Propylene
FormGranules
BrandOPAL
GradeRH03
Melt Flow Index ( 230 deg C & 2.16 kg)3.3 g/10 min
Density (23 deg C)3 0.90 Gm/cm
Tensile Strength @ Yield (50mm / min)35 MPa
Elongation @ Yield (50mm / min)10 %
Flexural Modulus (1.3 mm/min)1500 MPa
Notch Izod Impact Strength ( @ 23 deg C)50 J/m
Hardness (Rockwell)100 R Scale
Vicat Softening Point (10N)150 deg C
Heat Deflection Temperature (0.46N/m2)95 deg C
Product Description:
PP Homo Polymer RH03 is a natural colored high performance grade produced with the latest Ineos Gas Phase polymerization Technology exhibiting following features:
  • Very good processability.
  • Good balance of tenacity & elongation.
  • Low water carry-over.

PP Homo Polymer RH03 is recommended for following oriented structures (Stretched Tapes) applications:
  • Cement Packaging bags
  • Fertilizer Packaging bags
  • Food Grain Packaging bags
  • Bulk Industrial Packaging (FIBC)
  • General purpose wrapping fabric
Get Best QuoteRequest Callback
R03RR HMEL PP Raffia Granules

R03RR HMEL PP Raffia Granules

Product Price: Rs 79.5 / KgGet Best Price

Product Brochure

Product Details:
MaterialPoly Propylene
FormGranules
BrandHMEL
GradeR03RR
Melt Flow Index ( 230 deg C & 2.16 kg)3.4 g/10 min
Tensile Strength @ Yield (50mm / min)34 MPa
Tensile Elongation @ Yield (50mm / min)9 %
Flexural Modulus1500 MPa
Notch Izod Impact Strength ( 23 deg C)35 J/m
Vicat Softening Point (10N)154 deg C
Heat Deflection Temperature (0.455 MPa)95 deg C
Product Characteristics:
Polysure R03RR is Polypropylene Homopolymer, produced by Latest Novolen Technology & Primarily suitable for tape extrusion process applications. R03RR combines extremely low water carry-over with Exceptional processability, Good balance of tenacity & elongation for the production of tapes.

Recommended Applications:
  • R03RR is recommended for Tape yarns, Monofilaments, Ropes, Leno bags, Strapping & Thermoforming application.
Get Best QuoteRequest Callback
HR003 MRPL PP Raffia Granules

HR003 MRPL PP Raffia Granules

Product Price: Rs 79.5 / KgGet Best Price

Product Brochure

Product Details:
MaterialPoly Propylene
FormGranules
BrandMRPL
GradeHR003
Melt Flow Index (I2.16 @230 deg C)3.5 g/10 min
Tensile Strength at Yield34 MPa
Tensile Elongation at Yield9 %
Flexural Modulus1500 MPa
Izod Impact Strength35 J /m
Vicat Softening Point (10N)154 deg C
Heat Deflection Temperature (0.455MPa)85 deg C
Product Characteristics:
Mangpol HR003 is a Polypropylene Homo polymer produced by latest solvent free gas phase polymerization using Novolen Technology. This polymer is primarily suitable for extrusion process. HR003 features excellent processability coupled with low water carryover and excellent balance between tenacity and toughness.

Recommended Applications:
  • Stretched tapes for woven sacks for packaging Fertilizers, Cement, Polymer Pellets, Food Grains, Sugar, Carpet Backing.
  • Leno Bags for Vegetable packaging, Stretched tapes for FIBC. 
  • Ropes and yarns.
  • General purpose Thermoforming applications. 
Get Best QuoteRequest Callback
HP30G Aramco PP Raffia Granules

HP30G Aramco PP Raffia Granules

Product Price: Rs 79 / KgGet Best Price

Product Brochure

Product Details:
MaterialPoly Propylene
FormGranules
BrandAramco
GradeHP30G
Flexural Strength35 MPa
Tensile Strength at Yield34 MPa
Tensile Elongation at Yield9 %
Tensile Strength at Break19 MPa
Tensile Elongation at Break165 %
Flexural Modulus1300 MPa
Izod Impact, Notched 23 deg C3.0 kJ/m2
Hardness Rockwell98
Product Description: 
Aramco PP HP30G is a homopolymer polypropylene resin and is typically used for yarn extrusion characterized by ease of processing and low heat shrinkage. Yarn made from this resin typically exhibits excellent mechanical properties. This product is also typically used for thermoforming application.

Typical Applications: 
  • Woven sacks, woven cloths, monofilament, binding tape, thermoforming. This product is not intended for use in medical and pharmaceutical applications.
Get Best QuoteRequest Callback
HGX030SP Marlex PP Raffia Granules

HGX030SP Marlex PP Raffia Granules

Product Price: Rs 79 / KgGet Best Price

Product Brochure

Product Details:
MaterialPoly Propylene
Density0.906 g/cm3
FormGranules
BrandMarlex
GradeHGX030SP
Melt Flow Rate3 g/10 min
Tensile Strength at Yield37 MPa
Flexural Modulus, Secant1590 MPa
Notched Izod Impact31 J/m
Heat Deflection Temperature101 deg C
Typical raffia, fiber/yarn applications include:
  • Woven industrial fabric and bag
  • Rope and cordage
  • Woven carpet backing
  • Woven geotextile fabrics
  • Large parts
  • Good resistance to gas fading

This resin meets these specifications:
  • FDA 21 CFR 177.1520(c)1.1. May be used in contact with all types of foods at conditions of use A through H per 21 CFR 176.170(c).
  • All constituents of this resin are listed in Commission Regulation (EU) No 10/2011. Meets the requirements of Commission Regulation (EU) No 10/2011, Regulation (EC) No. 1935/2004, and Commission Regulation (EC) No 2023/2006. 
Get Best QuoteRequest Callback
Moplen HP456J Lyondell Basell PP Raffia Granules

Moplen HP456J Lyondell Basell PP Raffia Granules

Product Price: Rs 79 / KGGet Best Price

Product Brochure

Product Details:
MaterialPoly Propylene
Density0.900 g/cm3
FormGranules
BrandLyondell Basell
GradeMoplen HP456J
Melt Flow Rate, (230 deg C/2.16 kg)3.4 g/10 min
Flexural Modulus1500 N/mm2
Tensile Stress at Break, (23 deg C, 50 mm/min)21 N/mm2
Tensile Stress at Yield, (23 deg C, 50 mm/min)34 N/mm2
Tensile Strain at Break, (23 deg C, 50 mm/min)200 %
Tensile Strain at Yield, (23 deg C, 50 mm/min)11 %
Vicat Softening Temperature, (A50)156 deg C
Deflection Temperature Under Load, (0.45 MPa, Unannealed)91 deg C
Product Description: 
Moplen HP456J Lyondell Basell PP Raffia Granules used for extrusion and thermoforming applications. Moplen HP456J is formulated with a low water-carry-over additive package. Typical applications are monofilaments, ropes and tapes.
Get Best QuoteRequest Callback
NSY114G NSRP PP Raffia Granules

NSY114G NSRP PP Raffia Granules

Product Price: Rs 79 / KgGet Best Price

Product Brochure

Product Details:
MaterialPoly Propylene
Density0.91 g/cm3
FormGranules
BrandNSRP
GradeNSY114G
Melt Flow Rate3.5 g/10min
Isotactic Index98 %
Xylene Solubility2.5 %
Tensile Yield Stress37 MPa
Elongation at Break>200 %
Flexural Modulus1520 MPa
Noched Izod Impact Strength 23 deg C39 J/m
Hardness (Rockwell)95 R scale
Vicat Softening Temperature (10 N)155 deg C
Deflection Temperature (0.45 Mpa)110 deg C
Characteristics and Applications:
  • Woven bags, woven sheets, straps etc
Get Best QuoteRequest Callback
H1030 Tasnee PP Raffia Granules

H1030 Tasnee PP Raffia Granules

Product Price: Rs 79 / KgGet Best Price

Product Brochure

Product Details:
MaterialPoly Propylene
Density0.9 g/cm3
FormGranules
BrandTasnee
GradeH1030
Melt Flow Rate (230 deg C/2.16 kg)3 g/10min
Melting Temperature163 deg C
Vicat Softening Temperature152 deg C
Heat Distortion Temperature @ 0.45 MPa102 deg C
Tensile Strength @ Yield33 MPa
Tensile Elongation @ Yield10 %
Flexural Modulus (1% Secant)1450 MPa
Charpy Impact Strength (Notched) at 23 deg C4.0 KJ/m2
Rockwell Hardness100 R
H1030 Tasnee PP Raffia Granuleswith a Melt Flow Rate (MFR) of 3 g/10min. TASNEE PP H1030 is designed for stretch tape from water bath and chill roll, offering low water-carry-over and low shrinkage. Its good mechanical properties and compliance to food contact regulations allow it to be used in various applications. Typical applications for tape made with our polypropylene grade are: carpet backing, cement bags, woven bags, geo-textile, bulk handling & packaging as jumbo bags & ropes. TASNEE H1030 is also a general purpose injection molding grade for technical items.
Get Best QuoteRequest Callback

EXPLORE MORE CATEGORIES

Looking For "PP Raffia Granules"?
Thank you Your Enquiry has been sent successfully.
© M. S. Plast. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.